5.4 Removing and installing B-pillar trim
5.4.1 Removing
Note
The trim cannot be removed without being damaged.
Carry out following work:
– Press spreader pins -5- slightly into clips -3- -arrow a-.
Note
Spreader pins -5- remain in grommets -4-.
– Pull out clips -3-.
– Pull trim cover -1- with securing pins -2- out of grommets.
– Take spreader pins -5- out of grommets -4-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
5. Mouldings and trims 281