– Insert screwdriver -4- up to locking hook -3- in bearing bracket.
– Press cover cap -1- onto door.
– Push screwdriver -arrow- so far into hole until hook locks in
place.
– Fit door outer seal -5- in area of hole for locking hook
⇒ page 152 .
2.8 Removing and installing door handle
Note
Removal and installation are described only for the right door
handle. The removal and installation of the left door handle are
similar.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
138 Rep. gr.58 - Rear doors, door components