1.4 Removing and installing lock carrier with
add-on parts
1.4.1 Removing
Note
♦
The lock carrier is a safety-relevant component. It must not be repaired for this reason.
♦
In the event of damage, renew lock carrier.
Carry out following work:
– Move to service position ⇒ page 3 .
– Detach any electrical connectors.
– Drain coolant and disconnect coolant lines ⇒ Engine; Rep. gr.
19 ; Parts of the cooling system; Draining and filling coolant .
– Disconnect coolant lines for condenser ⇒ Heating, air condi‐
tioning; Rep. gr. 87 ; Repairs to the refrigerant circuit which
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
6 Rep. gr.50 - Body - front