1.8 Assembly overview - bonnet lock and release components
1 - Striker pin
❑ Removing and installing
⇒ page 46
❑ Adjusting ⇒ page 53
2 - Release lever
❑ Removing and installing
⇒ page 49
3 - Cable
❑ From release lever -2- to
cable coupling -4-
4 - Cable coupling
❑ Cable coupling is loca‐
ted above headlight on
driver side
❑ Separating
⇒ page 45 .
5 - Cable
❑ From cable coupling -4-
to bonnet lock -6-
❑ Clipped into cable cou‐
pling
6 - Lid lock
❑ Removing and installing
lid lock ⇒ page 43
❑ Adjusting ⇒ page 52
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
42 Rep. gr.55 - Bonnet, rear lid