2.9 Removing and installing striker plate
2.9.1 Removing
Carry out following work:
– Remove cover of striker plate in lock carrier cover.
– Undo bolts -2- and remove striker plate -1- from lock carrier
-3-.
2.9.2 Installing
Carry out following work:
– Mount striker plate -1- on lock carrier -3- with bolts -2-.
Specified torque of bolts -2-: 18 Nm
– Adjust striker plate ⇒ page 65 .
– Install cover of striker plate into lock carrier cover.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
2. Rear lid 63