2.10.2 Installing
Carry out following work:
Install in reverse order of removal.
Specified torque for bolt -4-: 1 Nm.
2.11 Removing and installing window slot in‐
ner seal
Note
♦
Removal and installation are described only for the window
slot inner seal on the right. Removal and installation of the
window slot inner seal on the left are analogous.
♦
Pull up seal equally and without distorting or bending it.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
2. Door components 145