2.7 Assembly overview - rear bumper carrier
1 - Rear bumper carrier
2 - Bolt
❑ Qty. 3 on each side.
❑ Specified torque: 20 Nm
3 - Foam element
❑ Self-adhesive.
❑ Not installed in all model
versions
2.8 Assembly overview - towing bracket
Note
♦
The specified torques refer only to factory-installed towing
brackets.
♦
Request torque specifications for other towing brackets from
relevant manufacturer.
♦
Information on electrics can be found in ⇒ Current flow dia‐
grams, Electrical fault finding and Fitting locations.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
190 Rep. gr.63 - Bumpers