3.2 Assembly overview - rear door windows
Note
The right side is shown. The left side is similar.
1 - Door window
❑ Removing and installing
⇒ page 221
2 - Fixed door window
❑ Removing and installing
⇒ page 232
3 - Bolt
❑ Qty. 2.
❑ Specified torque: 5.5
Nm
4 - Window regulator
❑ Removing and installing
⇒ page 227
5 - Nut
❑ Qty. 2.
❑ Specified torque: 8 Nm
6 - Window regulator motor
❑ Removing and installing
⇒ page 225
7 - Bolt
❑ Qty. 3.
❑ Specified torque: 4 Nm
8 - Spreader plug with spread‐
er pin
❑ For fastening the door
window -1-
❑ Always renew when
working on door window
-1-.
9 - Window channel
❑ Removing and installing
⇒ page 230
10 - Retaining clip
3.3 Removing and installing door window
Note
♦
Removal and installation are described only for the right door
window. The removal and installation of the left door window
is similar.
♦
Do not bend the window slot seals when lifting off!
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
3. Rear door window 221