2.2 Assembly overview - rear lid
1 - Rear lid
❑ Removing and installing
⇒ page 55
❑ Adjusting ⇒ page 64
2 - Wiring harness
3 - Adjustment buffer
❑ Left and right.
❑ Adjusting ⇒ page 64
4 - Lid lock
❑ Removing and installing
⇒ page 66
❑ With emergency re‐
lease function
⇒ page 66
5 - Hinge
❑ Removing and installing
⇒ page 61
6 - Gas strut
❑ Removing and installing
⇒ page 57
❑ Releasing gas
⇒ page 60
7 - Striker plate
❑ Removing and installing
⇒ page 63
❑ Adjusting ⇒ page 65
❑ Assignment ⇒ Parts
catalogue “ETKA”
8 - Registration plate light
❑ Removing and installing
⇒ Electrical system;
Rep. gr. 94 ; Removing and installing registration plate lights .
9 - Button to release rear lid
❑ Removing and installing ⇒ page 65
2.3 Removing and installing rear lid
2.3.1 Removing
Carry out following work:
– Remove rear lid trim ⇒ General body repairs, interior; Rep.
gr. 70 ; Rear lid trim .
– Remove connectors of all installed electrical components.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
2. Rear lid 55