1.5 Door alignment
1.5.1 Door alignment - shut lines and flushness
Note
♦
Vehicle must be standing on its wheels to enable rear door to be adjusted.
♦
The rear door is correctly adjusted when all shut lines are even when closed. When the door does not project
in or out too far and the contours align.
♦
To check gaps/shut lines: ⇒ Body Repairs; Rep. gr. 00 ; Technical data; Body panel gaps/shut lines; Body
- middle
♦
After installing or alignment, carry out corrosion protection measures on hinges and screws/bolts.
Carry out following work:
Adjusting shut lines
To be able to adjust gaps correctly, bolts -2- and -5- on B-pillar
must be loosened.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
General body repairs, exterior - Edition 08.2012
126 Rep. gr.58 - Rear doors, door components