3-50
IM 04L51B01-01EN
6
Select the paste destination. Make the paste range the same as the range of the
copied data (the number of lines).
7
Click Paste, which is located in the lower right of the window. You can also press
Ctrl+V on the keyboard.
The edit results from the Excel spreadsheet is pasted to the conguration window.
Note
• Depending on the format of the Excel cells that you are pasting to, the values may change when
you paste the contents from the Clipboard. For example, if the format is set to Number, “0001”
will change to “1”. You can prevent pasted values from being automatically corrected by setting
Number to Text in the Format Cells dialog box of the Excel sheet that you want to paste to.
• If the values cannot be pasted as they are to the Excel sheet even with the settings above, we
recommend that you use a text editor for copying and pasting.
• If the values that you edit with Excel or text editor are outside the setting range, when you paste
the data, the values will be corrected in the same way as when you enter values directly.
OperationExample9
Range Selection and Copying and Pasting in Table Type Screens
The AI channel settings screen will be used as an example to explain the procedure. In table
type screens, you can also edit copied information in Excel or text editor and paste it back in
the Web application (see note on page 3-50 ).
1
Select a range of channels as shown below.
Click the name of the line to select the entire line.
Drag down to select multiple lines.
2
Copy the channel information (lines).
Press Ctrl+C, or click Copy to copy the lines.
3.1 Using the Web Application to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)
To Next Page
Loading...
Need help?
General
