5-38
IM 04L51B01-01EN
Code Title Description and Corrective Action
Message
W8108 Hardware configuration This message appears on the system information screen or
network information screen when the system configuration
changes on the GX/GP. Click OK to update the information.
Hardware system configuration has changed. The
information will be updated.
W8109 Limit of configuration editing This message appears when setting parameters are loaded.
It indicates that restrictions will be placed on the configuration
capabilities due to the GX/GP condition or design limitations of
the Web application.
This configuration includes contents that could not be
changed.
Auxiliary Message
1 The hardware is recording data or executing math,
so the configuration cannot upload.
2 The configuration you are loading includes the
contents that cannot be changed from the web
application.
W8110 Limit of configuration editing This message appears when settings are being displayed. It
indicates that restrictions will be placed on the configuration
capabilities due to changes in the GX/GP condition.
The hardware was operated, so this operation will affect
the configuration.
Auxiliary Message
1 The hardware is recording data or executing math,
so the configuration cannot upload.
2 The hardware was operated. The configuration is
not fully compatible with the existing configuration
of hardware.
3 The hardware is currently running control,
therefore, the configuration cannot be loaded.
This message appears when settings that cannot be changed
during loop control are displayed and a loop control is started.
W8111 Save all This message appears during all settings save.
Save files to the current folder?
Auxiliary Message
• Setting parameters, Scale image, Report template,
Trusted Certificate, Certificate, Custom display (/
CG)
• Program pattern This message appears only when a PID module is detected on
a model with the Program control function (/PG).
W8112 Load all This message appears during all settings load.
Load files from the current folder?
Auxiliary Message
• Setting parameters, Scale image, Report template,
Trusted Certificate, Custom display (/CG)
• Program pattern This message appears only when a PID module is detected on
a model with the Program control function (/PG).
W8122 Unverified certificate
Check the certificate.
You can display the details of a problematic certificate and
execute authentication (or load) by using Unverified certificate
from the menu.
Communication failed due to certificate.
Auxiliary Message
1 Operation: Unverified certificate
W8123 Certificate This message appears during certificate installation when a
certificate is already installed when you are creating a self-
signed certificate.
Installed certificate exists. Overwrite the certificate?
W8125 Communication This message appears while waiting for the results of
processing when some time elapses after communication is
disconnected.
Communication disconnected. Please reload later.
W8127 Mode Switching This message appears when you click the Update button for
the A/D calibration content.
Switch to update mode?
W8129 Web application Set the Web browser zoom to 100%. This message appears
only once when you start the Web application.
Layout may be displayed incorrectly when the Web
browser zoom is not 100%.
W8134 Save all settings This confirmation message appears when the folder name
specified for all settings save already exists.
Same folder name exists, overwrite ?
W8136 Update configuration This message appears when the Web application detects a
change in the multi batch settings. Reloading is necessary to
avoid conflict between the GX/GP and Web application.
Multi batch settings have been changed.
Auxiliary Message
1 Please reload after restart of the hardware.
Continued on next page
5.2 Troubleshooting
To Next Page
Loading...
Need help?
General
