<10. Other Functions>
10-4
IM 11M12G01-02EN 1sh Edition : Mar. 25, 2021-00
10.1.12 Cell heater duty
The probe sensor is heated to and maintained at 750°C. When the sample gas temperature is
high, the amount of heater ON-time decreases.
10.1.13 Pwr. supply voltage mode
lower than 165 V, “100V”, is indicated. When it is over 165V, “200V” is indicated.
10.1.14 Power frequency mode
When it is over 55 Hz, “60Hz” is indicated.
10.1.15 Simple cell resistance
Displays the numeric value gained from the cell resistance value by using a simple cell without
times. This shows a value gained from a latest calibration.
10.1.16 Simple cell robustness
Simple cell resistance measurement evaluates the cell’s life expectancy with 4 levels: longer than
1 year, 6 months, 3 months or less than 1 month. (All values are estimated for the purpose of
10.2 Converter Detail
“Converter menu” > “Detail” to see the converter output or log data. Switch the screen with
.
Figure 10.4 Converter Detail
To Next Page
Loading...
Need help?
General
