<10. Other Functions>
10-6
IM 11M12G01-02EN 1sh Edition : Mar. 25, 2021-00
10.2.4 Measurement info
Displays average, maximum, minimum value of measurement. Maximum and minimum value
show the date when the measurement is conducted. Setup the monitoring hour value of average/
max. min according to the setting described in 8.6.2.
Figure 10.8 measurement info
10.2.5 Product information
Displays the set time (see "8.7.1 Setting the Date-and-Time"), version number of Main
software, HART address, HART device revision number.
Figure 10.9 Product information
10.2.6 Log information
Displays Alarm occurrence, Alarm cancel, Calibration history, Cell resistance during calibration,
detail data.
table 10.2 Log information
Log item Details (except Time)
Alarm: cell voltage error Cell electromotive force (mV)
Alarm: Heater temperature error Thermocouple electromotive force (mV)
Alarm occurrence: (Other) -
ALARM RESET -
Zero/span calibration history Span Correction Ratio (%), Zero
Compensation Ratio (%)
Cell internal storage resistor at zero
calibration
Power Supply ON -
Farm update -
Operator ID Operator ID input value
To Next Page
Loading...
Need help?
General
