Canon iR6000 Service Manual

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 6 FIXING SYSTEM
6-1 P
Descriptions
Heat roller
Main heater:controlling temperature mainly during printing
Sub heater: controlling temperature during standby
Main heater/Sub heater: controlling temperature during printing
200°C (in STBY)
[1] Main thermistor (temperature control, error detection)
[2] Sub thermistor (error detection)
[3] Thermal switch (error detection)
[1] Power-on sequence
[2] Model-specific sequence
[3] Ambient temperature sequence
Web roller (driven by solenoid and one-way clutch)
[1] By thermistor (temperature error)
[2] By thermal switch (overheating)
[1] Control of fixing assembly inlet guide drive (about 1 mm
up/down)
• High if original is B5R or longer
• Low if original is shorter than B5R
[2] Control of reciprocating movement of thermistor (about
12 mm)
[3] Control of reciprocating movement of upper separation
claw (about 3 mm)
1. Outline of Operation
1.1 Outline
The fixing system has the following major functions:
T06-101-01
Item
Fixing method
Fixing heater
100-Vmodel
120/230-V model
Control temperature
Temperature detection
Fixing temperature control
Cleaning method
Error detection
Other
Download Free Service Manual at http://printer1.blogspot.com

Canon iR6000 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan
Print Speed	60 ppm
Duplex Printing	Yes
Network Connectivity	Ethernet
Paper Sizes	A3, A4, B4, B5
Warm-Up Time	30 seconds
Multiple Copies	Up to 999
Magnification	25-400%
Copy Speed	60 ppm (A4)