Canon iR6000 Service Manual

COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 3 STANDARDS AND ADJUSTMENTS
3-8 T
3. Image Formation System
3.1 Routing the Grid Wire of the Primary Charging Assembly
See the Printer Manual: Chap. 4>7.8 “Charging Wire”
3.2 Routing the Charging Wire of Charging Assemblies
See the Printer Unit: Chap. 4>7.8 “Charging Wire”
3.3 Mounting the Drum Cleaning Blade
See the Printer Manual: Chap. 4>7.11 “Drum Cleaner”
3.4 Mounting the Developing Blade
See the Printer Manual: Chap. 4>7.8 “Developing Assembly”
3.5 Replacing the Potential Sensor/Potential Control PCB
See the Printer Unit: Chap. 4>7.4 “Potential Sensor Assembly”
1. The potential sensor and the potential control PCB are adjusted as a
single unit; be sure to replace both at the same time.
2. If you have replaced the sensor and the PCB, be sure to execute offset
adjustment of the sensor.
Download Free Service Manual at http://printer1.blogspot.com

Canon iR6000 Specifications

General

Print Technology	Laser
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan
Print Speed	60 ppm
Duplex Printing	Yes
Network Connectivity	Ethernet
Paper Sizes	A3, A4, B4, B5
Warm-Up Time	30 seconds
Multiple Copies	Up to 999
Magnification	25-400%
Copy Speed	60 ppm (A4)