Undocking the Compaq LTE Lite
To undock the Compaq LTE Lite from the Compaq SmartStation, complete the
following steps:
1. Remove any cable or option that extends beyond the enhanced option slot.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
If a cable or option extends beyond the enhanced option slot when docking
or undocking the computer, the option connectors may be damaged.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
2. Unlock the expansion base keylock (Figure D-3).
3. Save and close open files.
4. Turn off the system by pressing the expansion base power button.
5. Press the eject button.
NOTE: A beep indicates that the computer cannot be undocked. Verify that
you have completed steps 1 through 5 and try again. If the
expansion base still beeps, refer to Chapter 7 for troubleshooting
information.
6. The docking mechanism disconnects the computer from the external options
connector and pushes the computer toward you.
7. Slide the computer out of the expansion base. Do not lift the computer
up as you slide it out.
8. To disconnect the SmartStation Adapter from the computer, turn the
thumbwheel counterclockwise, then carefully pull the adapter from the
computer (Figure D-9).
To Next Page
Loading...
Need help?
General