Compaq LTE Elite User Manual

D.3 Docking The Compaq LTE ELITE In The Compaq Ministation
NOTE:The Compaq LTE Lite Family of Personal Computers cannot dock in the
Compaq MiniStation/EN or the Compaq MiniStation/TR convenience base.
Docking the Computer
To dock the Compaq LTE Elite in the Compaq MiniStation/EN or the Compaq
MiniStation/TR convenience base, complete the following steps:
1. Connect the convenience base to an electrical outlet.
2. Turn off and disconnect any external devices that are connected to the
computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To avoid damage to the PCMCIA connector when docking, be sure to remove any
PCMCIA cards and cables that do not allow the PCMCIA compartment door to
close fully.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
3. Remove any cable or card that does not allow the PCMCIA compartment
door to close fully.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To avoid data loss from a computer reboot, turn the computer off before
docking it in the convenience base. Do not initiate Standby or
Hibernation before docking.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
4. Turn the computer off.
5. Close the computer display (optional, if the monitor support cover is
removed from the convenience base).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To avoid damage to the external options connector on the convenience base
or the external options door on the computer, be sure that the external
options door is fully open before docking.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
6. Fully slide open the external options door or remove the input/output
(I/O) connector cover (Figure D-2).
7. Pull the docking lever on the right side of the convenience base toward

Compaq LTE Elite Specifications

General

Brand	Compaq
Model	LTE Elite
Category	Laptop
Language	English