3-3
INSPECTIONS / ADJUSTMENTS
MAINTENANCE SCHEDULE
● Carry out pre-operation check at each scheduled maintenance period based on the information described in the owner’s
manual.
I : INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY.
R : REPLACE L : LUBRICATE C : CLEAN
● These instructions are based on the assumption that the motorcycle will be used exclusively for its designed purpose.
Sustained high speed operation, or operation in unusually wet or dusty conditions, will require more frequent service
than specified in the following chart.
＊ If there are no appropriate type of tools and maintenance data available, or if you do not have mechanical technology
contact authorized maintenance shops, dealers or other designated repair shops for maintenance and inspections.
To ensure safety, inspections and maintenance of these parts must be carried out by authorized maintenance shops,
dealers or other designated repair shops.
NOTE
1. After the odometer reading exceeds 12,000km, repeat maintenance service at intervals indicated in the table.
2. After riding in areas with high humidity or pollution, carry out maintenance service more frequently.
3. Replace every 2 years. Proper technology is required for this job.
＊
＊
＊
＊
＊
＊
＊
＊
＊
＊
＊
＊
＊
FUEL LINE(FUEL TUBE)
FUEL FILTER
THROTTLE GRIP OPERATION
AIR CLEANER
SPARK PLUG
VALVE CLEARANCE
TRANSMISSION OIL
ENGINE OIL
ENGINE OIL FILTER
CARBURETOR IDLE SPEED
BRAKE FLUID
BRAKE SHOE/PAD WEAR
BRAKE SYSTEM
BRAKE STOP SWITCH
HEADLIGHT ADJUSTMENT
SIDE STAND
SUSPENSION
BOLTS, NUTS, FASTENERS
WHEELS/TIRES
STEERING HEAD BEARING
DRIVE BELT
WEIGHT ROLLER
SLIDE PIECE
OIL FILTER SCREEN
MOVABLE DRIVE FACE INNER PART
NOTE 2
NOTE 3
NOTE 3
I
R
I
I
I
R
R
I
I
I
I
I
I
I
R
I
I
I
R
R
I
I
I
I
I
I
I
I
I
I
I
I
I
C
L
I
R
I
I
I
R
R
I
I
I
I
I
I
I
I
I
I
I
I
I
I
C
L
I
R
I
I
I
R
R
R
I
I
I
I
I
I
I
I
I
I
I
I
I
C
L
Every 1,000㎞ : C
FREQUENCY
ODOMETER READING(NOTE 1)
61218
14812REMARK
ITEM
x 1000Km
MONTH
To Next Page
Loading...
Need help?
General
