● Check the side stand ignition cut-off switch :
-Put the side stand up.
-Start the engine.
-Lower the side stand. The engine should stop as you
put the side stand down.
● If there is a problem with the system, check the side
stand switch.
SUSPENSION
NOTE
•Do not ride motorcycle with an unsatisfactory
suspension. Loose or worn suspension parts will lead
to deterioration in the vehicle’s safety and operation
efficiency.
FRONT WHEEL
● Hold the brake lever, and compress the front cushion
up and down several times to check the operating
conditions.
● Check the front fork for oil leakage, parts damage or
looseness.
REAR WHEEL
● Compress the near cushion up and down several times
to check the operating conditions.
● Check the rear fork for oil leakage, parts damage or
looseness.
BOLTS, NUTS, FASTENERS
● Check all nuts and bolts of the frame during the regular
maintenance to check if they meet the prescribed
torque value.
● Check all pins, clips, hose clamps and cable stays.
3-9
INSPECTIONS / ADJUSTMENTS
To Next Page
Loading...
Need help?
General
