Dell N3000 Series User Manual

Configuring SNMP 349
Configuring Communities
Beginning in Privileged EXEC mode, use the following commands to
configure access rights for SNMPv1 and SNMPv2.
show snmp group
[
group_name ]
View SNMP group configuration information.
show snmp user
[ user_name ]
View SNMP user configuration information.
Command Purpose
configure Enter Global Configuration mode
snmp-server community
string [ro | rw | su]
[view
view-name ]
[ipaddress
ip_address ]
Configure the community string and specify access criteria
for the community.
• community-string — Acts as a password and is used to
authenticate the SNMP management station to the
switch. The string must also be defined on the NMS in
order for the NMS to access the SNMP agent on the
switch (Range: 1-20 characters)
•
ro — Indicates read-only access
•
rw — Indicates read-write access.
•
view-name — Specifies the name of a previously defined
MIB view.
• ip_address — Specifies the IP address of the management
station. If no IP address is specified, all management
stations are permitted
Command Purpose

Dell N3000 Series Specifications

General

Managed	Yes
Stacking Ports	2 x 10GbE SFP+
Weight	12.3 lbs (5.6 kg)
Operating Temperature	32° to 113°F (0° to 45°C)
Ports	24 or 48 10/100/1000 ports