70 Switch Feature Overview
Power over Ethernet (PoE) Plus Features
For information about configuring PoE Plus features, see "Managing General
System Settings" on page 279."
Power Over Ethernet (PoE) Plus Configuration
The Dell Networking N2024P/N2048P and N3024P/N3048P switches support
PoE Plus configuration for power threshold, power priority, SNMP traps, and
PoE legacy device support. PoE can be administratively enabled or disabled
on a per-port basis. Power can also be limited on a per-port basis.
PoE Plus Support
The Dell Networking N2024P/N2048P and N3024P/N3048P switches
implement the PoE Plus specification (IEEE 802.1at), in addition to the
IEEE 802.3AF specification). This allows power to be supplied to Class 4 PD
devices that require power greater than 15.4 Watts. Each port is capable of
delivering up to 34.2W of power. Real-time power supply status is also
available on the switch as part of the PoE Plus implementation.
NOTE: The Dell Networking N2024P/N2048P and N3024P/N3048P switches
support PoE Plus. The PoE Plus features do not apply to the other models in the
Dell Networking N2000/N3000/N4000 series.
To Next Page
Loading...
Need help?
General
