Dell N3000 Series User Manual

Configuring Connectivity Fault Management 867
To add an MA, click the Add link at the top of the page.
Dot1ag MEP Configuration
Use the MEP Configuration page to define switch ports as Management End
Points. MEPs are configured per domain and per VLAN.
To display the
page, click Switching → Dot1ag → MEP Configuration in the
tree view.
Figure 26-7. Dot1ag MEP Configuration

Dell N3000 Series Specifications

General

Managed	Yes
Stacking Ports	2 x 10GbE SFP+
Weight	12.3 lbs (5.6 kg)
Operating Temperature	32° to 113°F (0° to 45°C)
Ports	24 or 48 10/100/1000 ports