Dell N3000 Series User Manual

Configuring Port Characteristics 489
Link Dependency Configuration
Use the Link Dependency Configuration page to create link dependency
groups. You can create a maximum of 16 dependency groups. The page
displays the groups whether they have been configured or not.
To display the Link Dependency Configuration page, click Switching
→
Link Dependency
→ Configuration in the navigation panel.
Figure 18-4. Link Dependency Configuration
Creating a Link Dependency Group
To create link dependencies:
1
Open the Link Dependency Configuration page.
2 In the Group ID field, select the ID of the group to configure.
3 Specify the link action.
4 To add a port to the Member Ports column, click the port in the Available
Ports
column, and then click the < button to the left of the Available
Ports
column. Ctrl + click to select multiple ports.
5 To add a port to the Ports Depended On column, click the port in the
Available Ports column, and then click the > button to the right of the
Available Port s column.

Dell N3000 Series Specifications

General

Managed	Yes
Stacking Ports	2 x 10GbE SFP+
Weight	12.3 lbs (5.6 kg)
Operating Temperature	32° to 113°F (0° to 45°C)
Ports	24 or 48 10/100/1000 ports