Dell N3000 Series User Manual

368 Managing Images and Files
Active Images
Use the Active Images page to set the firmware image to use when the switch
boots. If you change the boot image, it does not become the active image
until you reset the switch.
On the N4000 series switches, the images are named
active and backup .
NOTE:
To display the Active Images page, click System
→ File Management →
Active Images in the navigation panel.
Figure 14-2. Active Images

Dell N3000 Series Specifications

General

Managed	Yes
Stacking Ports	2 x 10GbE SFP+
Weight	12.3 lbs (5.6 kg)
Operating Temperature	32° to 113°F (0° to 45°C)
Ports	24 or 48 10/100/1000 ports