Digi Connect IT 4 User Manual

Serial port
Connect IT 4 devices have multiple serial ports that provide access to different features, depending on
the serial port mode selection.
Default serial port configuration
You can review the default serial port configuration for your device.
Serial mode options
You can choose a serial mode option for each serial port, depending on the feature that you want to
use.
n Login: Allows the port to be used to log into the CLI.
n Remote Access: Provides socket level access to ports.
n Power Management: Configure the port for use with a power controller.
n UDP serial: Provides access to the serial port using UDP.
n Modbus: Allows the device to function as a Modbus protocol gateway.
View serial port information
n Show serial status and statistics
n Review the serial port message log
Default serial port configuration
The Connect IT 4 default serial port configuration is:
n Enabled
n Serial mode: Login
n Label: None
n Baud rate: 9600
n Data bits: 8
n Parity: None
n Stop bits: 1
n Flow control: None
Digi Connect IT® 4 User Guide
208

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English