Digi Connect IT 4 User Manual

Diagnostics Analyze network traffic
Digi Connect IT® 4 User Guide
866
Analyze network traffic
The Connect IT 4 device includes a network analyzer tool that captures data traffic on any interface
and decodes the captured data traffic for diagnostics. You can capture data traffic on multiple
interfaces at the same time and define capture filters to reduce the captured data. You can capture
up to 10 MB of data traffic in two 5 MB files per interface.
To perform a more detailed analysis, you can download the captured data traffic from the device and
view it using a third-party application.
Note Data traffic is captured to RAM and the captured data is lost when the device reboots unless you
save the data to a file. See Save captured data traffic to a file.
This section contains the following topics:
Configure packet capture for the network analyzer 867
Example filters for capturing data traffic 876
Capture packets from the command line 877
Stop capturing packets 878
Show captured traffic data 879
Save captured data traffic to a file 880
Download captured data to your PC 881
Clear captured data 882

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English