Hardware Exchange power tips
Digi Connect IT® 4 User Guide
889
Exchange power tips
The Connect IT 4 may include four interchangeable plug tips that allow the Power Supply Unit (PSU) to
operate in most countries. The PSU comes with the United States style plug installed.
To change the plug tip:
1. Place the tip of a small flathead screw driver in the half-circle area below the power prongs
(the PUSH button), and slide the current plug tip forward.
2. Pull off the attached plug converter.
3. Slide the new tip down into place until it clicks.
Note For more information regarding power-tip compatibility with global deployments, visit
www.worldstandards.eu/electricity/plugs-and-sockets/.
Select SIM card
You can use the SIM button on the back of the unit to select which SIM card you want to use: first or
second.
To Next Page
Loading...
Need help?
General
