Digi Connect IT 4 User Manual

Get started with Connect IT Cellular ONLY: Insert the CORE module
Digi Connect IT® 4 User Guide
21
Equipment Description
See
Connect hardware and connect to a cellular network.
COREmodule cover and cover
screws (2)
Mounting screws
These are used to mount the Connect IT 4 to a wall or another
surface.
Loose label sticker
A loose label sticker that includes the unique device password is
included in the box. This default password will be needed if the
device is factory reset and you want to access the web UI on the
device.
Retain this label sticker with your hardware records.
See QR code definition for information about the QRcode.
Required additional equipment
Equipment Description
Ethernet cable
CAT 5/6 Ethernet cable
The cable is used to connect your PC to the Connect IT 4 for initial
configuration.
See Connect hardware and connect to site network using an
Ethernet LAN.
SIMcard
An activated SIM card provided by your cellular network operator.
You can insert up to two SIMcards in the CORE module. See
Cellular ONLY: Insert the CORE module.
The Connect IT 4 supports the standard mini-SIM cards (2FF).
Note This is required only if you are using a COREmodule to
connect to a cellular network. See Connect hardware and connect
to a cellular network.
Cellular ONLY: Insert the CORE module
Note If you are connecting to a network using an Ethernet connection, you can skip this section. See
Connect hardware and connect to site network using an Ethernet LAN.

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English