Contents
Digi Connect IT® 4 User Guide
Get started with Connect IT
Verify product components 20
Included equipment 20
Required additional equipment 21
Cellular ONLY: Insert the CORE module 21
Prerequisites 22
Connect the hardware to a network 23
Connect hardware and connect to a cellular network 23
Connect hardware and connect to site network using an Ethernet LAN 23
Connect equipment to the Connect IT serial ports
Serial port pinout and use 24
Firmware configuration
Review Connect IT 4 default settings 27
Local WebUI 27
Digi Remote Manager 27
Default interface configuration 27
Other default configuration settings 28
Change the default password for the admin user 28
Configuration methods 30
Using Digi Remote Manager 31
Access Digi Remote Manager 31
Using the local web interface 31
Log out of the web interface 32
Use the local RESTAPI to configure the Connect IT 4 device 32
Use the GETmethod to return device configuration information 32
Use the POST method to modify device configuration parameters and list arrays 34
Use the DELETE method to remove items from a list array 35
Access the terminal screen from the web UI 36
Using the command line 38
Access the command line interface 38
Log in to the command line interface 38
Exit the command line interface 39
Digi Connect IT® 4 User Guide
7
To Next Page
Need help?
General
