Digi Connect IT 4 User Manual

Command line interface Command line reference
Digi Connect IT® 4 User Guide
951
Syntax
show event [table <status|error|info>] [number INTEGER]
Parameters
table: Type of event log to be displayed (status, error, info).
number: Number of lines to retrieve from log. (Minimum: 1, Default: 20)
show hotspot
Show hotspot statistics.
Syntax
show hotspot [name STRING] [ip STRING]
Parameters
name: The configured instance name of the hotspot.
ip: IP address of a specific client, to limit the status display to only this client.
show ipsec
Show IPsec status & statistics.
Syntax
show ipsec [tunnel STRING] [all] [verbose]
Parameters
tunnel: Display more details and config data for a specific IPsec tunnel.
all: Display all tunnels including disabled tunnels.
verbose: Display status of one or all tunnels in plain text.
show l2tp lac
Show L2TP access concentrator status & statistics.
Syntax
show l2tp lac [name STRING]
Parameters
name: Display more details for a specific L2TP access concentrator.
show l2tp lns
Show L2TP network server status & statistics.
Syntax
show l2tp lns [name STRING]

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English