File system Upload and download files
Digi Connect IT® 4 User Guide
845
5. Browse to the location of the file on your local machine. Select the file and click Open to upload
the file.
Download files
1. Log into the Connect IT 4 WebUI as a user with Admin access.
2. On the menu, click System. Under Administration, click File System.
The File System page appears.
3. Highlight the directory to which the file will be uploaded and click to open the directory.
4. Highlight the appropriate file and click (download).
Upload and download files by using the Secure Copy command
Copy a file from a remote host to the Connect IT 4 device
To copy a file from a remote host to the Connect IT 4 device, use the scp command as follows:
> scp host hostname-or-ip user username remote remote-path local local-path to
local
where:
n hostname-or-ip is the hostname or IP address of the remote host.
n username is the name of the user on the remote host.
n remote-path is the path and filename of the file on the remote host that will be copied to the
Connect IT 4 device.
n local-path is the location on the Connect IT 4 device where the copied file will be placed.
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the Connect IT 4 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/Connect IT 4-
23.3.31.129.bin local /etc/config/scripts to local
To Next Page
Loading...
Need help?
General
