Digi Connect IT 4 User Manual

Routing IP routing
Digi Connect IT® 4 User Guide
272
Routing services
Your Connect IT 4 includes support for dynamic routing services and protocols. The following routing
services are supported:
Service or
protocol Information
BGP The Border Gateway Protocol (BGP) service supports BGP-4 (
RFC1771
).
IS-IS The IPv4 and IPv6 Intermediate System to Intermediate System (IS-IS) service
(
RFC1142
).
NHRP Next Hop Resolution Protocol (NHRP) (
RFC2332
). Does not support NHRP
authentication.
OSPFv2 The IPv4 Open Shortest Path First (OSPF) service supports OSPFv2 (
RFC2328
).
OSPFv3 The IPv6 Open Shortest Path First (OSPF) service supports OSPFv3 (
RFC2740
).
RIP The IPv4 Routing Information Protocol (RIP) service supports RIPv2 (
RFC2453
)
and RIPv1 (
RFC1058
).
RIPng The IPv6 Routing Information Protocol (RIP) service supports RIPng (
RFC2080
).
Configure routing services
Required configuration items
n Enable routing services.
n Enable and configure the types of routing services that will be used.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English