Digi Connect IT 4 User Manual

Virtual Private Networks (VPN) NEMO
Digi Connect IT® 4 User Guide
459
n The firewall zone of the NEMO tunnel.
n The IP address of the NEMO home agent server. This is provided by your cellular carrier.
n The home agent's authentication key. This is provided by your cellular carrier.
n Home agent registration lifetime. This is provided by your cellular carrier.
n The local network interfaces that will be advertised on NEMO.
Additional configuration items
n The home agent Software Parameter Index (SPI).
n Path MTU discovery.
Path MTU discovery is enabled by default. If it is disabled, identify the MTU.
n Care of address: the local network interface that is used to communicate with the peer.
l If set to Interface, identify the local interface to be used. Generally, this will be the
Wirelesss WAN (Modem).
l If set to IP address, enter the IP address.
n The local network of the GREendpoint negotiated by NEMO.
l If the local network is set to Interface, identify the local interface to be used.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > NEMO.
The NEMO tunnel is enabled by default. To disable, toggle off Enable.
4. For Home IP address, type the IPv4 address of the NEMO virtual network interface.

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English