Digi Connect IT 4 User Manual

Services Modbus gateway
Digi Connect IT® 4 User Guide
553
n To view information about Modbus gateway clients, click Clients.
n To view statistics that are common to both the clients and server, click Common
Statistics.
n To view configuration details about the gateway, click the  (configuration) icon in the
upper right of the gateway's status pane.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
Connect IT 4 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show modbus-gateway command at the system prompt:
> show modbus-gateway
Server Connection IP Address Port Uptime
----------------- ----------- ----- ------
modbus_socket 10.45.1.139 49570 6
modbus_socket 10.45.1.139 49568 13
Client Uptime
-------------------- ------
modbus_socket_41 0
modbus_socket_21 0
modbus_serial_client 428
>
If the message Server connections not available is displayed, this indicates that there are no
connected clients.
3. Use the show modbus-gateway verbose command at the system prompt to display more
information:
> show modbus-gateway verbose
Client Uptime
-------------------- ------
modbus_socket_41 0
modbus_socket_21 0
modbus_serial_client 506
Common Statistics
-----------------
Configuration Updates : 1
Client Configuration Failure : 0
Server Configuration Failure : 0
Configuration Load Failure : 0
Incoming Connections : 4
Internal Error : 0

Digi Connect IT 4 Specifications

General

Brand	Digi
Model	Connect IT 4
Category	Network Router
Language	English