3. Commissioning
3.4 Overview of switch-on behavior
3.4 Overview of switch-on behavior
The following figure shows what happens when the device is turned on.
l
RUN start
l
Card start
As soon as the easyE4 device starts, the options will be read.
The easyE4 basic device will check whether a microSD has been inserted and
whether there is a starting program on the microSD. The device will then switch to
RUN or STOP mode depending on these parameters.
easyE402/24 MN050009ENEaton.com
115
To Next Page
Loading...
Need help?
General