0.1 About this manual
0.1.2 Target group
This manual is intended for electricians and electrical engineers, as well as for the
people who will be in charge of performing the electrical installation and people who
will be using the control relays as operating and monitoring devices or as integrated
operating and control devices in their own applications.
This manual is intended for people who:
l
Want to use an easyE4 control relay
l
Develop an application with easySoft 8.
l
Want to test or commission a developed application
l
Maintain an application with easySoft 8.
l
Want to diagnose faults in an application
easyE4 devices must be installed and connected exclusively by electricians and
people who are familiar with electrical installation work.
CAUTION
Installation requires qualified electrician
Follow the safety instructions for the easyE4!
The section on safety instructions must be read and understood by
everyone who will be working with the easyE4 before the actual work
is performed.
WARNING
Incomplete operator manual copies
Working with individual pages taken out from the operator manual
may lead to bodily injury and property damage due to missing safety
information.
Always work with the latest and full document.
easyE402/24 MN050009ENEaton.com
17
To Next Page
Loading...
Need help?
General