1. Description of easyE4 control relay
1.9 Safety regulations
1.9.2.5 Prerequisites for proper operation
In order for the device to be able to meet the contractually stipulated terms, the fol-
lowing must be observed:
l
Only qualified personnel should be allowed to work with the device.
l
The personnel working with the device must have read and understood all doc-
uments for the device and must follow all the instructions in them.
l
The required ambient conditions must be met.
l
Maintenance work must be carried out correctly.
Make sure to read the → "Legal disclaimer", page 18.
We assume no liability for damages, consequential damages, and/or accidents
caused by the following:
l
Failure to follow any applicable occupational health and safety rules, standards,
and/or regulations
l
Device failures or function disturbances
l
Improper use and/or handling
l
Not following the instructions or observing the information in the documentation
for the device
l
Alterations, changes, and repairs to the device
40
easyE402/24 MN050009ENEaton.com
To Next Page
Loading...
Need help?
General