9.3 Version Update
Version 2.4.0
Updated features:
1. Optimization of dome-control effect.
2. Support scene switch and roaming window via B20 MVC/multi-screen controller/decoder on video wall and
device division via segments. Refer to 3.4.1 Adding a Device.
3. Import Excel sheets into and export them from input channel list via IE control. Refer to 7.1.5 Import/Export
Channel List.
4. Optimization of accessed iVMS platforms and application of adapting roaming windows on video wall. Refer
to 6.3 Access via iVMS Platform.
5. Image switch of 256-ch NVR. Refer to 5.6 256-ch NVR Access and Operation.
6. The device is inactive when it leaves factory. Only after setting the administrator password can the device be
activated. Any operation except activation is allowed if the device is inactive.
Version 2.3.1
Updated features:
1. Connectable to 64-ch NVR.
2. Support video wall display control for decoder. Refer to 4.2.4 Video Wall.
3. Support Video Wall/Scene setting for output channel. Refer to 4.4.4 Setting Video Wall/Scene.
4. Support cycle time setting for input group. Refer to 4.3.4 Setting Input Group.
5. Support Video Wall/ Scene switch by shortcut keys. Refer to.5.3.11 .
6. Calling pan-scan is supported by pressing Pattern key. Refer to 5.4.8 Calling Pan Scan.
7. Support the export of input/output list as the .txt file by Configuration Tool.
Version 2.2.0 (New Joystick)
Updated features:
1. Use the new pattern joystick.
2. PTZ speed is configurable by menu settings instead of Aux key definition. Refer to 4.7.4 and 7.2.8 Live View
and PTZ Speed Settings.
Version 2.2.0
Updated features:
1. 3 user accounts can be added for keyboard operation, and up to 1280 devices can be added to each user
account.
2. Add the network device by DNS. Refer to 3.4.1 Adding a Device.
3. Stream media settings can be copied to all encoders. Refer to 4.1.7 Stream Media Settings.
4. Local live view by zero channel encoding. Refer to 4.3.2 Live View by Channel.
5. Add scene settings for the MVC system. Refer to 6.1.5 Scene Settings.
6. Add the roaming window switch for the large screen display. Refer to Roaming Window Switch.
7. Add the base picture settings for the large screen display. Refer to Setting Base Picture.
8. Add the local live view in iVMS platform. Refer to 6.3.6
错误
!
未找到引用源。
.
9. Add the playback in iVMS platform. Refer to 6.3.4
错误
!
未找到引用源。
.