HIKVISION DS-1100KI User Manual

DS-1100KI Network Keyboard User Manual
43
General Settings: Configure the NIC type, IP address, port, gateway, subnet mask, MAC address, DNS server
address, and HTTP port of the current encoder device.
PPPoE: Configure the user name and password of PPPoE settings.
DDNS: Enable DDNS, select the protocol type to IPServer, DynDns, PeanutHull or NO-IP, and configure the
corresponding settings.
NTP: Configure NTP settings to synchronize the time of device to the selected time zone.
Network HDD: Set the IP address, file path and type of the network HDD to use.
4.1.2 Serial Port Settings
Click Serial on the remote settings interface to enter the Serial Settings interface.
Figure 4. 6 Serial Port Settings
You can set the RS232 port and RS485 parameters.
Figure 4. 7 RS232 and RS485 Settings
4.1.3 Camera Settings
Click Camera on the remote settings interface to enter the Camera Settings interface.
You can configure the video display, video parameters, record settings, motion detection, video loss detection,
tampering alarm, privacy mask, and IPC management (for hybrid DVR and NVR only).

HIKVISION DS-1100KI Specifications

General

Split keyboard	No
Keyboard layout	-
Device interface	RS-232 + RS-485 + RJ-45
Recommended usage	Office
Keyboard form factor	Mini
Connectivity technology	Wired
Display type	TFT
Product color	Black
Keyboard style	Straight
Ergonomic design	Yes
Product type	Control panel
Housing material	Plastic
Quantity per pack	1 pc(s)
USB 2.0 ports quantity	1
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Operating voltage	12 V
Power source type	DC

Weight and Dimensions

Depth	110 mm
Width	435 mm
Height	193 mm
Keyboard weight	2000 g
Keyboard dimensions (WxDxH)	435 x 110 x 193 mm