HIKVISION DS-1100KI User Manual

DS-1100KI Network Keyboard User Manual
84
Corresponding error message will appear on the screen when you perform wrong operation.
• Setting a Preset by Input Channel
Steps:
1. Press the Num + CAM keys to select the input channel.
2. Operate the joystick to move PTZ to the desired position.
Press the Num + PRESET keys to set the current position as the preset with entered number.
Figure 5. 17 Setting a Preset by Input Channel
 It is invalid to input the 0+CAM keys in the current operation mode.
 Corresponding error message will appear on the screen when you perform wrong operation.
5.4.3 Calling a Preset
The programmed preset can be called to achieve the desired position. Select the output monitor or window and
then press the CALL key on the keyboard to call the preset. You are also allowed to directly select the camera by
pressing Num + CAM keys and then press the CALL key to realize preset callup.
• Calling a Preset by Output Channel
Steps:
1. Press the Num + MON keys to select the output channel.
2. Press the Num + WIN keys to select the display window.
3. Press the Num + CALL keys to call the programmed preset.
This operation is valid only when the preset function is supported by the connected camera/dome.

HIKVISION DS-1100KI Specifications

General

Split keyboard	No
Keyboard layout	-
Device interface	RS-232 + RS-485 + RJ-45
Recommended usage	Office
Keyboard form factor	Mini
Connectivity technology	Wired
Display type	TFT
Product color	Black
Keyboard style	Straight
Ergonomic design	Yes
Product type	Control panel
Housing material	Plastic
Quantity per pack	1 pc(s)
USB 2.0 ports quantity	1
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Operating voltage	12 V
Power source type	DC

Weight and Dimensions

Depth	110 mm
Width	435 mm
Height	193 mm
Keyboard weight	2000 g
Keyboard dimensions (WxDxH)	435 x 110 x 193 mm