OPERATOR'S STATION
1-98
USB Power Supply Port
Using the USB Power Supply Port
The USB power supply Port (2) can be used to power or
charge mobile devices or electrical equipment.
IMPORTANT:
The USB power supply Port (2) of this vehicle
supplies DC 5V.
Its maximum rated capacity is 5V/2A.
If a device that exceeds the maximum capacity is
plugged in, the protective function will be actuated,
which may prevent use/charging of the device.
The type of USB terminals that can be used are
A-type.
If a different type of terminal is used, it may fail to
operate or charge, or may cause damage.
The only function is power output, and it cannot be
used for data transfer, communication etc.
Some devices require a special cable. In such case,
use the special cable.
Do not use for a long time with the engine stopped.
Doing so may discharge the batteries.
Remove the connected device promptly after it is
charged.
It is not waterproof, so do not get any liquids, such as
water on it.
Note that warranty repairs do not cover damage to a
connected device, or loss or corruption of data.
Do not connect damaged devices. Smoke and/or fire
may result.
Never insert metal or foreign objects into the USB
terminals. Electrical shock and/or damage may
result.
Be careful of connected cables. Tripping on them
may result in falling down and getting hurt, or
damage to the device.
1
MDD5-01-013
MDD5-01-014
MDC1-01-502
2
2
To Next Page
Loading...
Need help?
General
