OPERATOR'S STATION
1-11
How to Use Screens
Displaying Basic Screen
IMPORTANT: Start the engine after the basic screen is
displayed.
When the key switch is turned to the ACC or ON position,
the starting screen displays for about 2 seconds. When the
key switch is kept in ACC position, only hour meter, clock
and radio will be displayed. When the key switch is turned
from ACC to ON position, the basic screen will be displayed.
IMPORTANT: When the key switch is turned to ON
position, the alternator alarm will be displayed on the
basic screen. Until the alternator starts generating
power after the engine starts, the alternator alarm is
displayed on the basic screen.
Basic Screen
Starting Screen
Alternator Alarm
MDAA-01-003EN
MDC1-01-001
MDC1-01-042