SAFETY
S-35
Avoid Heating Near Pressurized Fluid Lines
Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to yourself
and bystanders.
Do not heat by welding, soldering, or using a torch near
pressurized fluid lines or other flammable materials.
Pressurized lines can be accidentally cut when heat goes
beyond the immediate flame area. Install temporary
fire-resistant guards to protect hoses or other materials
before engaging in welding, soldering, etc.
Avoid Applying Heat to Lines Containing
Flammable Fluids
Do not weld or flame cut pipes or tubes that contain
flammable fluids.
Clean pipes and tubes thoroughly with non-flammable
solvent before welding or flame cutting.
Precautions for Handling Accumulator and Gas
Damper
High-pressure nitrogen gas is sealed in the accumulator and
the gas damper. Inappropriate handling may cause explosion,
possibly resulting in serious injury or death.
Strictly comply with the following items:
Do not disassemble the unit.
Keep the units away from open flames and fire.
Do not bore a hole, do not cut by torch.
Avoid giving shocks by hitting or rolling the unit.
Before disposing of the unit, sealed gas must be released.
Consult your authorized dealer.
SA-030
To Next Page
Loading...
Need help?
General
