TRANSPORTING
6-7
Lifting Machine
d
WARNING:
Use lifting cables and other lifting tools that are
sufficient strong, and free from any damage and/or
other defect.
Consult your authorized dealer for correct lifting
procedures, and the size and types of lifting cable
and tools.
Pull the pilot control shut-off lever to the LOCK
position so that the machine does not accidentally
move while being lifted.
Incorrect lifting procedure and/or incorrect wire rope
attachment will cause the machine to move (shift)
while being lifted, resulting in machine damage and/
or personal injury.
Do not lift the machine quickly. Excessive load will be
applied to the lifting wire ropes and/or lifting tools,
possibly causing them to break.
Do not allow anyone close to, or underneath the
lifted machine.
The indicated gravity center is for the standard
specification machine. The center of gravity will
vary depending on the kinds of attachments and/or
optional equipment installed and their positioning.
Take care not to lose the balance of the machine
while lifting.
To Next Page
Loading...
Need help?
General
