Huawei Quidway S3100 Series User Manual

Operation Manual – Management VLAN
Quidway S3100 Series Ethernet Switches Chapter 1
Management VLAN Configuration
Huawei Technologies Proprietary
1-2
1.2 Management VLAN Configuration
1.2.1 Prerequisites
Before configuring the management VLAN, make sure the VLAN operating as the
management VLAN exists. If VLAN 1 (the default VLAN) is the management VLAN, just
go ahead.
1.2.2 Configuring the Management VLAN
Table 1-1 Configure the management VLAN
Operation Command Remark
Enter system view
system-view
—
Configure a
specified VLAN to
be the
management
VLAN
management-vlan vlan-id
Required
By default, VLAN 1 operates
as the management VLAN.
Create the
management
VLAN interface
and enter VLAN
interface view
interface vlan-interface
vlan-id
Required
Assign an IP
address to the
management
VLAN interface
ip address { ip-address
net-mask | bootp-alloc |
dhcp-alloc }
Required
By default, the management
VLAN interface has no IP
address.
Provide a
description string
for the
management
VLAN interface
description string
Optional
By default, the description
string of the management
VLAN interface is
“Vlan-interface vlan-id
Interface”.
Add a default route
ip route-static 0.0.0.0
0.0.0.0 { interface-type
interface-number |
gateway-address }
[ preference value ]
Required

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English