Huawei Quidway S3100 Series User Manual

Operation Manual – IGMP Snooping
Quidway S3100 Series Ethernet Switches Chapter 1
IGMP Snooping Configuration
Huawei Technologies Proprietary
1-10
 Note:
z You cannot set the isolate VLAN as a multicast VLAN.
z One port can belong to only one multicast VLAN.
z The port connected to a user end can only be as set as a hybrid port.
1.3 Displaying Information About IGMP Snooping
You can execute the following display commands in any view to display information
about IGMP Snooping.
Table 1-10 Display information about IGMP Snooping
Operation Command Description
Display the current
IGMP Snooping
configuration
display igmp-snooping
configuration
Display IGMP
Snooping message
statistics
display igmp-snooping
statistics
Display IP and MAC
multicast groups in one
or all VLANs
display igmp-snooping group
[ vlan vlanid ]
You can execute the
display commands in
any view.
Clear IGMP Snooping
statistics
reset igmp-snooping
statistics
You can execute the
reset command in
user view.
1.4 IGMP Snooping Configuration Example
1.4.1 Example 1
Configure IGMP Snooping on a switch.
I. Network requirements
Connect the router port on the switch to the router, and other non-router ports which
belong to VLAN 10 to user PCs. Enable IGMP Snooping on the switch.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English