Huawei Quidway S3100 Series User Manual

Operation Manual – QoS
Quidway S3100 Series Ethernet Switches Chapter 1
QoS Configuration
Huawei Technologies Proprietary
1-16
1.9.2 Configuration Procedure on the Source Switch
Table 1-17 Configuration procedure on the source switch
Operation Command Description
Enter system view
system-view
—
Create the
Remote-probe
VLAN and enter
the VLAN view
vlan vlan-id
The parameter vlan-id
represents the ID of the
Remote-probe VLAN.
Define the current
VLAN as the
Remote-probe
VLAN
remote-probe vlan enable
Required
Exit the current
view
quit
—
Enter Ethernet port
view of the Trunk
port
interface interface-type
interface-number
—
Configure to permit
Remote-probe
VLAN packets to
pass through the
Trunk port
port trunk permit vlan
remote-probe-vlan-id
Required
Exit the current
view
quit
—
Configure the
remote source
mirroring group
mirroring-group group-id
remote-source
Required
Configure the
remote source
monitoring port
mirroring-group group-id
mirroring-port
mirroring-port-list { inbound
| outbound }
Required
Configure the
remote reflector
port
mirroring-group group-id
reflector-port reflector-port
Required
Do not enable STP on the
remote monitoring reflector
port, which must be an
Access port.
After a port has been
configured as a reflector port,
users cannot modify its port
type or default VLAN ID,
neither add it the other
VLANs.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English