Huawei Quidway S3100 Series User Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches Chapter 7 Controlling Login Users
Huawei Technologies Proprietary
7-1
Chapter 7 Controlling Login Users
7.1 Introduction
A switch provides ways to control different types of login users, as listed in Table 7-1.
Table 7-1 Ways to control different types of login users
Login
mode
Control method Implementation Related section
By source IP
addresses
Through basic
ACLs
Section
7.2.2 “Controlling
Telnet Users by Source IP
Addresses
”.
Telnet
By source and
destination IP
addresses
Through
advanced ACLs
Section
7.2.3 “Controlling
Telnet Users by Source
and Destination IP
Addresses
”.
SNMP
By source IP
addresses
Through basic
ACLs
Section
7.3 “Controlling
Network Management
Users by Source IP
Addresses
”.
By source IP
addresses
Through basic
ACLs
Section
7.4 “Controlling
Web Users by Source IP
Address
”.
WEB
Disconnect Web
users by force
By executing
commands in
CLI
Section
7.4.3
“Disconnecting a Web User
by Force
”.
7.2 Controlling Telnet Users
7.2.1 Prerequisites
The controlling policy against Telnet users is determined, including the source and
destination IP addresses to be controlled and the controlling actions (permitting or
denying).
7.2.2 Controlling Telnet Users by Source IP Addresses
Controlling Telnet users by source IP addresses is achieved by applying basic ACLs,
which are numbered from 2000 to 2999.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English