Huawei Quidway S3100 Series User Manual

Operation Manual – RMON
Quidway S3100 Series Ethernet Switches Chapter 1 RMON Configuration
Huawei Technologies Proprietary
1-5
Table 1-2 Display and debug RMON
Operation Command
Display RMON statistics
display rmon statistics [ interface-type
interface-number | unit unit-number ]
Display RMON history information
display rmon history [ interface-type
interface-number | unit unit-number ]
Display RMON alarm information display rmon alarm [ entry-number ]
Display extended RMON alarm
information
display rmon prialarm
[ prialarm-entry-number ]
Display RMON events display rmon event [ event-entry ]
Display RMON event logs display rmon eventlog [ event-entry ]
1.4 RMON Configuration Example
I. Network requirements
z Ensure that the SNMP agents are correctly configured before performing RMON
configuration.
z The switch to be tested has a configuration terminal connected to its console port
and is connected to a remote NMS through Internet. Create an entry in the
Ethernet statistics table to make statistics on the Ethernet port performance for
network management.
II. Network diagram
Console Port
Sw itc
Netw ork Port
h
Internet
Console Port
Sw itc
Netw ork Port
h
Internet
Figure 1-1 Network diagram for RMON configuration
III. Configuration procedures
# Configure RMON.
<Quidway> system-view

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English